Transmission & Engine Mounts + Pitch Stop for Subaru Forester, Impreza WRX, STI

High quality stainless steal with 100% rubber. Engine Mounts Set and transmission mount + pitch stop mount. Stiffer transmission mounts give you a more connected feel with your car. The KEIN transmission mount kit will reduce most drivetrain movement, which efficiently transmits more power to the ground. This means more accurate launches during drag racing and autocross type.

Events where you do not want drivetrain. Another feature the KEIN Transmission mounts have is a proper interlock built into it. The stock part is held together with bonded rubber and a couple of small tabs, which means it is possible that the OEM part could fail and leave your transmission disconnect from your chassis. Eliminates wheel hop / traction loss. Made out steel K02001 / K02502.

Street and track torture tested. Bolts with a strenght of approximately 50 kN. Solid Engine Mounts for Subaru. The engine mounts do a great job decreasing engine movement and increasing drive train response throughout the entire RPM range. Throttle response will also be increased.

Since your removing the soft stock rubber mounts, engine noise will be a bit louder. Replacing OEM parts 41022FA090, 41022FA091, 41022AA310, OE41022AA310, 41022FA092, 41022FE060, 41022FE050, SBM002, D1010FE110, D1010FE120, 410224S020, ST4100055110, ST4100055120, PSE3498. Eliminates wheel hop / traction loss - Bolts with a strength of approximately 50 kN.

Made out steel K02001/ K02502 - Street and track torture tested - Polymer painting (all colors). Reduce that drivetrain "shudder" you feel during hard acceleration by installing a KEIN Pitch Stop Mount. Pretty much any modification you do to your WRX or STi dramatically increases engine torque. And while the factory Pitch Stop Mount is perfectly fine for OEM power levels, it most certainly was NOT designed to handle the 300+ lb-ft that your typical modified WRX or STi puts out.

The Pitch Stop Mount is found under the factory top-mount intercooler (installation is simple) between the fire wall and the front end of the transmission. The pitch stop mount is designed to produce crisper gear shifts by preventing the front end of the transmission from pitching up or down, forward and back. Made out steel K02001/ K02502. Please specify the color you want before ordering!

Orders made on Saturday, Sunday, Holidays in our country(Russia) will be processed on the next business(work) day. Processing includes checking, packing, and sending your orders to the post-office. We seek your patience and understanding should this happen. However, in particular cases, your order can be split into several packages. This is mainly caused by different supply warehouses locations.

In this case you will be provided with two or more tracking numbers. These countries include Algeria, Tunisia, Albania, Kosovo and some others. We are sorry for this temporary inconvenience. This product is designed and carefully made by Russian company. They have been manufacturing part for over 5 years.

This KEIN parts are good known in Eastern Europe, North America and Asian Markets. We are happy to solve and explain the problem and tell all our customer to be satisfied! The item "Transmission & Engine Mounts + Pitch Stop for Subaru Forester, Impreza WRX, STI" is in sale since Wednesday, July 15, 2020.

This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Motor Mounts". The seller is "spec_equipment_for_cars_and_life" and is located in Tolyatti. This item can be shipped worldwide.

Country/Region of Manufacture: Russian Federation
Material: High Quality Stainless Steal with 100% Rubber
Mount Type: Solid
Surface Finish: Gloss and Matt Powder Coating
Manufacturer Part Number: KSUB001 / KSUB002 / KSUB003 / KSUB010
Placement on Vehicle: Left
Brand: KEIN
Fitment Type: Direct Replacement
Warranty: 5 Year
Mounting Hardware Included: Yes