Motor Mounts Components

Scion FR-S FRS BRZ 1JZ Swap Kit 2JZGTE Supra 6 Speed Drift Drag USA

Scion FR-S FRS BRZ 1JZ Swap Kit 2JZGTE Supra 6 Speed Drift Drag USA
Scion FR-S FRS BRZ 1JZ Swap Kit 2JZGTE Supra 6 Speed Drift Drag USA
Scion FR-S FRS BRZ 1JZ Swap Kit 2JZGTE Supra 6 Speed Drift Drag USA
Scion FR-S FRS BRZ 1JZ Swap Kit 2JZGTE Supra 6 Speed Drift Drag USA
Scion FR-S FRS BRZ 1JZ Swap Kit 2JZGTE Supra 6 Speed Drift Drag USA
Scion FR-S FRS BRZ 1JZ Swap Kit 2JZGTE Supra 6 Speed Drift Drag USA
Scion FR-S FRS BRZ 1JZ Swap Kit 2JZGTE Supra 6 Speed Drift Drag USA

Scion FR-S FRS BRZ 1JZ Swap Kit 2JZGTE Supra 6 Speed Drift Drag USA
These Juggernaut Motorsport engine brackets are the most affordable mount kits on the market! They are made in the USA and allow you to swap a 2.

JZGTE or a 1JZGTE, VVTI or non-VVTI into your Infinity BRZ or FRS with minimal. This kit locates the 2JZ engine as low and as far back as possible in the engine bay to move the center of gravity back towards the center of the car. Designed to work with the front sump oil pan. Depending on transmission, modifications to the trans tunnel, hood latch bar, lower rad support and heater lines may need to be modified for proper clearance.

These Engine Brackets are Laser Cut in an ISO-9001 Facility to our exact standards. These Engine brackets were engineered to handle the highest horsepower JZ engine you can stuff in this chassis. Using FEA design and real world testing, we have created a Strong, yet Light-weight, Mount bracket that is affordable for the end user.

These Engine Brackets are made from HSLA steel and are Slotted in both directions to give the end user the most amount of adjustability. They are powder-coated black for corrosion protection and also look great. Your vehicle's center of gravity comes into play most often when the car is making a turn. When you drive around a turn, particularly at higher speeds, the momentum of your vehicle transfers the load which causes the body of the car to lean in that direction.

That's why in a car with a higher center of gravity, taking a turn at a high rate of speed can cause the car to flip over - the center of gravity isn't able to compensate for the body lean, and the car falls over. Not included but r ecommend to use 2.5 tall universal Polyurethane bushing mounts or Aluminum mounts to interface between the chassis and engine brackets.

See the last pictures for an example with dimensions.


Scion FR-S FRS BRZ 1JZ Swap Kit 2JZGTE Supra 6 Speed Drift Drag USA