Moran Motorsport Injectors 160lb/hr Atomizer MRE Racing Billet Injector
Extreme Flow for your high horsepower applications. These injectors flow 235 lbs/hr at 43.5 PSI (3 BAR) and are adjustable from 150 to 235! These units are low-impedance and require peak and hold injector drivers or additional resistors for saturation drivers. Despite the high flow rate, they are linear and controllable at low pulse widths compared to other extreme flow injectors!
These injectors were designed from the ground up as racing specific injectors by Mike Moran of M. And have been tested on extreme horsepower applications. PowerTip 5 fuel injectors make it easy for EFI engines to produce 1,000 to 4,000 HP with either gasoline or methanol. Machined from a proprietary material, coated with titanium nitride, the PowerTip injectors flow from 150 lb/hr up to 600 lb/hr. The PowerTip 5 was designed as the first purpose built racing fuel injector.The injectors operate linearly with a pulse width as small as 1.5 milliseconds. Race Specific Extreme Flow Design. Robust Proprietary, TiN coated Design.
Fits in most many applications. Coil Resistance: 2.4 Ohms / Low Impedance / Low-Z (ECM peak & hold driver or modifications required). Turn on time: 1.5ms. Orifice Type: Single Orifice / Pintle. Spray Pattern: Large Fog w/Semi-Cone Pattern.
The item "Moran Motorsport Injectors 160lb/hr Atomizer MRE Racing Billet Injector" is in sale since Wednesday, June 03, 2015. This item is in the category "Vehicle Parts & Accessories\Car, Truck Parts\Engines, Components\Motor Mounts".The seller is "parts_australia2014" and is located in Melbourne Vic. This item can be shipped to Australia, to North, South, or Latin America, to all countries in Europe, to all countries in continental Asia, to New Zealand.
- Brand: Moran
- MPN: HP1600ML