JZ 350z G35 1JZ Swap Kit 2JZGTE VVTi Supra 6 Speed Drift Drag USA Twin Turbo NOS

These Juggernaut Motorsport engine brackets are the most affordable mount kits on the market! They are made in the USA and allow you to swap a 2. JZGTE or a 1JZGTE, VVTI or non-VVTI into your Infinity 350Z or G35 with minimal. This kit locates the 2JZ engine as low and as far back as possible in the engine bay to move the center of gravity back towards the center of the car. Designed to work with the front sump oil pan and depending on the transmission selection the tunnel may need slight modification.

These Engine Brackets are Laser Cut in an ISO-9001 Facility to our exact standards. These Engine brackets were engineered to handle the highest horsepower JZ engine you can stuff in this chassis. Using FEA design and real world testing, we have created a Strong, yet Light-weight, Mount bracket that is affordable for the end user.

These Engine Brackets are made from HSLA steel and are Slotted in both directions to give the end user the most amount of adjustability. They are powder-coated black for corrosion protection and also look great. Your vehicle's center of gravity comes into play most often when the car is making a turn. When you drive around a turn, particularly at higher speeds, the momentum of your vehicle transfers the load which causes the body of the car to lean in that direction.

That's why in a car with a higher center of gravity, taking a turn at a high rate of speed can cause the car to flip over - the center of gravity isn't able to compensate for the body lean, and the car falls over. Hardware to bolt the brackets to the engine.

---