Innovative 88-91 CIVIC / CR-X COMPETITION TRACTION BAR 60A

NOTE: - Although this traction/competition bar kit was made for the USDM D-Series applications, alternate engines (engine swaps/conversions) can be used. The stock JDM/EDM chassis will not work.

If your Civic/CRX is JDM or EDM made please see: 88-91 CIVIC/CRX VTEC / 90-93 INTEGRA COMPETITION/TRACTION BAR (B-SERIES) - 59311. H22A swaps may require additional modification to be used with this comp/traction Bar. If you are using a half style radiator: 88-91 CIVIC EF COMPETITION CROSSMEMBER UNIVERSAL RADIATOR MOUNTS FOR COMPETITION BAR - 59104. 88-91 CIVIC RADIATOR BRACKET TO MOUNT 92-00 CIVIC STYLE RADIATOR - 59100 (for Civic Vehicles).

88-91 CR-X RADIATOR BRACKET TO MOUNT 92-00 CIVIC STYLE RADIATOR - 59101 (for CRX Vehicles). The INNOVATIVE MOUNTS Competition/Traction Bar Kit is designed to increase the rigidity and stability of the vehicle's front suspension.

By tying-in the front lower control arms to the frame, the front suspension becomes more solid, thus increasing traction and eliminating wheel-hop. For front wheel drive drag racers and road racers, this directly results in reduced 60-ft times and cornering speeds. The design of the bar not only reduces unwanted lateral lower arm movement, but also ties the lower chassis legs together providing a much more rigid and stronger setup. This Comp/Traction bar kit is powder-coated for durability and corrosion resistance, as are the steel radius arms. Each radius arm is equipped with a race grade heim/spherical joint allowing for an OEM fitment that is adjustable to suit all vehicle setups, whether a pro-load is needed or just to stop unwanted movement that can cause changes in suspension geometry during high speed cornering or launching. The Comp/Traction bar will work with engine swaps and can be used with full or half sized radiators. Due to its slim design it will also accept the use of larger down pipes and manifolds. NOTE: It is strongly recommended that all installs be done by a mechanic or automotive specialist. PLEASE MAKE SURE THIS KIT FITS YOUR VEHICLE BEFORE BOLTING THEM IN PLACE. Innovative Engine Mounts are built for performance driving. Although Innovative's bushings are made to absorb engine vibration, you may still notice slight vibration depending on your engine's series and HP. Innovative Mounts removes the dampening oil containers harbored by OEM/Stock mounts. By switching to stiffer mounts without the fluid reduces wheel hop and increases driving response. NOTE: Front Torque Mount Also Available: - 88-91 CIVIC / CRX FRONT TORQUE ENGINE MOUNT & BRACKET (D-SERIES) - 19142. 88-91 CIVIC/CRX(USDM) COMPETITION TRACTION BAR KIT (Stock D-Series).

2 Radius Rods(19.75). Processing begins as soon as an order has been placed, therefore we cannot change, cancel or modify orders once they have been confirmed. Most emails are answered within 24 hours, including weekends and holidays. The item "Innovative 88-91 CIVIC / CR-X COMPETITION TRACTION BAR 60A" is in sale since Saturday, April 08, 2017. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Motor Mounts".

The seller is "sparktecmotors" and is located in United States. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

Brand: Innovative Mounts
Manufacturer Part Number: 59112
Warranty: Yes