Bare Steel Jeep YJ Small Block Chevy SBC Conversion V8 V6 Motor Mounts Poly

These bolt-in Chevy V8 and V6 conversion motor mounts fit your 87-95 Jeep Wrangler YJ. Designed specifically to fit the YJ, these are not universal mounts. The kit comes with all of the necessary hardware and you won't find our anti-crush design in any other bolt-in kit.

This design allows you to torque the frame through bolts to spec for a true weld-free fitment. These require you to cut your factory mounts off the frame and drill holes (angle grinder and drill required).

Energy Suspension 9.4102G polyurethane isolators. Generation I and II Chevy small block v8 and 4.3L V6. Works with mechanical fuel pump.

Works with all Jeep YJ models 1987 to 1995. Bolt-in, anti-crush design spreads force across both vertical walls of frame tube. Matches factory engine offset (1?

To passenger side) to provide clearance for steering stem and to ensure proper driveline alignment. These are the same Jeep V8 conversion motor mounts as our more expensive powder coated version. If not thoroughly sandblasted, powder coat will peal. We've seen it many times on other manufacturers' products, thus the additional cost for the powder coated version. Manufactured in the USA by Live Axle Machine Company.

---