1320 Performance Engine Mounts for EJ Series Engines for WRX sti brz 86 legacy

1320 Performance performance EJ engine mount kit. Designed to fit the 93-21 Impreza, 04-21 STI, 02-21 WRX, 86, brz, frs, 04-09 outback 05-09 outback XT, 05-09 Legacy, 05-09 legacy GT, 04-21 forester, 04-18 forester XT, 13-21 crosstrek. No Notching or Trimming Required. Bushing after break in period the vibration will calm down but it will still be stiffer than stock motor mounts. Please keep in mind that this is for Performance motor mount kit. It is strongly recommended that all installs be done by a mechanic or automotive specialist.

PLEASE MAKE SURE THIS KIT FITS YOUR VEHICLE BEFORE BOLTING THEM IN PLACE. 1320 Engine Mounts are built for performance driving. Although 1320 bushings are made to absorb engine vibration, you may still notice vibration depending on your engine's series and HP. 1320 Mounts removes the dampening oil containers harbored by OEM/Stock mounts.

By switching to stiffer mounts without the fluid reduces wheel hop and increases driving response. Special care must be taken when installing Engine Mounts with aftermarket headers.

Wrapping and/or additional shielding on the header primaries is required to keep heat away from the Engine Mount to prevent bushings from being damaged. Especially during dyno tuning (with very little air flowing around headers and mounts), care must be taken to prevent damage to the bushings. Does not fit 6 cylinder engine models.

---